The new, Tiger Pro 54HC panel is based on a 182mm, 54-cell design and exhibits an efficiency of up to 21.3%. The manufacturer claims the new product is particularly suitable for residential projects in high snow or high wind load areas.
The Tiger Pro 54HC module.
Chinese module manufacturer JinkoSolar has launched a new solar module for distributed generation projects.
The Tiger Pro 54HC panel is available in five versions with power ratings ranging from 395 to 415 W, and efficiency ranging from 20.28% to 21.3%.
The new product is made with 108 high-efficiency, half-cut monocrystalline cells and features a maximum system voltage of 1,500 V.
The open-circuit voltage is between 36.9 V and 37.31 V and the short-circuit current ranges from 13.71 A to 14.01 A. All five versions of the module measure 1,718×1,134×30mm and weigh 22kg.
The panel can be used with operating temperatures ranging from -40 degrees Celsius to 85 degrees Celsius and their operating temperature coefficient is -0.35% per degree Celsius.
It is enclosed between 3.2mm high transparency, tempered glass, and also features a junction box with an IP 68 rating. The manufacturer offers a 25-year linear power output guarantee and a 15-year product guarantee.
“Suitable for a variety of distributed energy resources (DER), the new Tiger Pro modules feature a redesign in terms of size and weight, two of the most important features to fit the height and arm-length of installers, which are also user-friendly for rooftop installation,” Jinko said in a statement.
The manufacturer also stated that the module provides remarkable mechanical load safety and reliability under extreme weather conditions, which should make it suitable for installation in high snow or high wind load areas. “The Tiger Pro modules continue to meet the needs of most residential customers with [their] small size and elegant appearance, and [are] expected to become the best choice for high-efficiency PV modules in the residential market,” the company explained.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
More articles from Emiliano Bellini
Please be mindful of our community standards.
Your email address will not be published. Required fields are marked *
Save my name, email, and website in this browser for the next time I comment.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.
Legal Notice Terms and Conditions Privacy Policy © pv magazine 2023
This website uses cookies to anonymously count visitor numbers. View our privacy policy. ×
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.